Rajvir International

Supplying and fixing of plastic speed bump made out of engeneering plastic material. It can bear a load of 80 Tons (Approx.). Two highly reflective  reflectors  moulded in PMMA materials are welded  with ABS base plate through  ultra-sonic welding process and then fixed on to the speed bumpin angle of 35 degree  so that dust and water cannot touch reflector’s inside area and this it maintains its reflectivity for a long time . The speed bump is designed so dynamically and compact that it can bear maximum load on it.   Size of the speed bump; Length-350 mm, Width – 250 mm, Height – 50mm.  It is available I yellow/black combination.

 

1. Cost Effective

Speed bumps that are made from asphalt, metal, concrete are quite costly and can burn a big hole in your pocket, when you install them in the long roads that lead to your property. When you want to buy speed bumps in bulk, Engineering Plastic is the most preferred material as it is reasonably priced. 

2. Installation process

Unlike metal or asphalt speed bumps,  Engineering Plastic speed breaks are very easy to install. They can be dismantled with the same ease as well. On an average, it takes just about 45minutes to one hour to install a  speed bump. This makes it one of the most durable materials to be used in case of an emergency. These speed breakers can be taken from one place to another quite easily for installation.

3. Suits all roads

One of the best things about Engineering plastic speed bumps is that it can be used for all kinds of road surfaces. This makes it one of the cost-effective brands available in the industry today because you don't have to invest in different types of models for different roads in your area. Asphalt and other materials need different coats and polishing over it to make them suitable for the roads that they are installed in. When you use speed bumps, you can save yourself from spending these extra costs on polishes and coatings.

4. Visibility

Plastic speed bumps, when given reflective yellow stripes, become highly visible during the night hours, thereby helping you to drive safely and carefully. Since they are sturdy, they can stand all kinds of climate and are highly reliable in cases of tricky roads, rough terrains, uneven roads and the like.

 to hold the mirror securely at a specific height, often with a base plate for ground or surface mounting. Here's a more detailed breakdown:

• Purpose:The pipe acts as a support structure, holding the convex mirror (which is typically round or dome-shaped) at a suitable height for viewing traffic or other areas requiring a wide field of vision. 
• Materials:Common materials include powder-coated MS (mild steel) or stainless steel pipes, chosen for their strength and resistance to weather. 
• Construction:The pipe is often attached to a base plate, allowing for secure mounting on the ground, a wall, or other surfaces. 
• Length and Diameter:The length and diameter of the pipe can vary depending on the size of the mirror and the desired mounting height. For example, a 6-foot long pipe with a 3-inch diameter is mentioned in one product description. 
• Features:Pipes may come with features like pre-drilled holes in the base plate for mounting and may be designed to be buried partially in the ground or bolted to a concrete foundation. 
• Applications:These pipes are commonly used for mounting convex safety mirrors in driveways, parking lots, roadways, and other areas where visibility is limited. 

Additional Information:

• Production Capacity: 500
• Delivery Time: same day or next day